5th Gen 4Runner Rock Sliders 2010
5th Gen Toyota 4Runner Rock Sliders - 2010 +
ShrockWorks Rock Sliders (AKA Rock Rails) are the ultimate in serious rocker protection AND great looks for your 4Runner.
The most vulnerable area on any vehicle while off-roading is the rocker panels.
Tube nerf bars and factory steps look nice, but they are made of a thin
material and will quickly buckle with even a moderate blow while driving offroad (View
Damage Example) .
They are the strongest rock sliders available for your 4Runner. Only the
best and strongest materials are used. The tube portion is 1.75" x 0.134
thick tubing. This tubing has a very high strength to weight ratio and is
used in applications such a roll cages for race cars. The legs and the main rail of the slider are made from 2"x2" 3/16" wall square tube. This is the area that gets the most abuse and the square shape and heavy wall thickness makes it many times stronger that the typical 1.75"x.120 wall round tubing found in most 4Runner Sliders. Shrockworks Sliders will allow
to charge ahead offroad with no fear of damage to your rocker panels!
ShrockWorks rock sliders also function as excellect steps to get in the vehicle
or reach the roof rack! Many other designs do not stick out far enough to be useful
for this.
Protecting your 5th Generation 4Runner doesn't have to mean giving up a lot of ground clearance
either. The 30 deg. angled sweep of the side tubes on ShrockWorks rock sliders
allows for excellent clearance and also provides great protection for fending
side impacts to the door area. Side impacts are another extremely common source of damage off-road.
If you are in a tight spot and slip sideways, it is often the door on your 4Runner that will take the blow. The stick-out of the tube portion fends off side impacts while also
provide a convenient step up into your rig.
Installation:
-
Simple bolt-on. No cutting or welding required. Drilling one 3/8" hole per side to install an additional bolt is recommended for offroad use. You only have to drill through one side of the frame material, and there is easy access to the back of this area to put a nut on the bolt.
-
All necessary hardware provided.
Specifications:
- Weight: 107 lbs.
- Materials: 1.75"x.134 wall DOM, 2"x2"x3/16" wall square
tubing, 1/4""plate mounting pads with gussets.
- Powder coated in an EXTREMELY durable semi-gloss black powder coat.
- SOLD AS A SET (Driver & Passenger)
Options pics:
- Extra Center Support (explanation pic here)
Individually handmade to order by skilled craftsman in in Houston, TX USA.
Reviews
