search

Shop By Category

Follow Us on FacebookJoin our Mailing List

Info

Your cart

empty

Login

Jeep CJ-7 & Scrambler Sliders
Jeep CJ-7 & Scrambler Sliders
ShrockBars Jeep Rock Sliders for CJ-7 & CJ-8 Scrambler. AKA: Rocker Guards, Rocker Protection & Rock Rails.

ShrockBars are the ultimate solution for Jeep CJ rocker protection. Nerf bars wont cut it offroad!

The most vulnerable area on any 4x4 while off-road is your rocker panels, especially if you're a rock crawler. ShrockBars rocker guards blanket them in 3/16” plate steel. You'll never worry about them again! Shrockworks rock sliders look great on your Jeep too. ShrockBars Rock Rails are CAD designed, laser cut and bent on a CNC press brake for a precison fit.

Four wheeling and rock crawling with ShrockBars rocker guards installed, means you don't have to give up precious ground clearance to protect those rockers like you would with a nerf bar or frame mounted protection. The unique side tubes serve several purposes. Most importantly protection. They fend off blows to your doors and the side of your Jeep which are very common when slipping sideways into objects. They provide a place to step up into your Jeep, and they make it easy to use your hi-lift jack without causing damage. The tube portion of the sliders is beefy 1.75” x 0.134 wall tubing. The tube is attached at an upward sweeping angle and is reinforced with two center support pieces (three on the Jeep unlimited.)

What really sets ShrockBars rock sliders apart from other Jeep rocker protection is the strength and performance of the mounting system. Mounting flat plate or angle iron to the rockers is not terribly challenging, but when a tube is added to protect from side impacts, it also adds the potential for considerably greater torque to be applied to the rocker area; therefore, mounting them securely becomes much more challenging and important. If you come down hard on the tube portion, the sliders will try to torque and rotate into the body. Our mounting system controls these forces on several planes.

Six stainless steel bolts run the length of the rockslider to control vertical forces. Six additional bolts come up from the bottom through three large backing plates per side to clamp the slider tight to the reinforced floor. This provides a super-strong mount and eliminates the need for attaching to the body mounts. Unlike many CJ & Scrambler rock slider designs, ShrockBars cover the floor pan area under the rockers fully!

On the CJ-7 & CJ-8, because of the less rigid tub, three of these bolts pass through a secondary bracket called “The Vise” ( view pic )which fits inside the Jeep. Two additional bolts pass through the Vise and downward through the floor and attaching it to the bottom of the slider with flush head bolts. Lastly, ShrockBars are tied into the front and rear body mount bolts to prevent any chance of the slider rotating into the body.

Don't settle for a rock slider design with tube welded on as as afterthought. Our rocker guards were designed from the ground up to be fitted with side tubes and withstand all the abuse you want to throw at them. Shrockworks rocker protection for TJ, CJ, and YJ are all compatible with any size body lift without modifications.

One other note, we don’t need to warn you that your rockers aren’t the only thing worth protecting while offroad. In addition to saving your rocker panels, our jeep rocker guards can also help save you noggin! You can bolt the front mounting plate for your roll cage into the bottom of the sliders which will provide a much more secure mount than merely attaching it to the sheet metal of the floor pan. Many other rocker protection products only wrap a few inches underneath and do not allow this. The three bolt heads you see in the center of this picture ( view pic ) show how this was done on a TJ.

Installation:
Installation can be easily accomplished by the average do-it-yourself Jeep owner. Installation requires only basic hand tools, a floor jack and a drill. Detailed instructions are provided.

Specifications:
- Weight: 115 lbs
- Materials: 3/16" plate steel and 1.75”X.134 wall round tubing
- Flush Bolts are now std equipment
- SOLD AS A SET (Driver & Passenger)

LASER CUT SHROCKWORKS LOGO. No longer offered on CJ. They will ship without the Logo cut in them.

 

Awarded Moab Jeeper Top Choice for best in class!

 

Read the Expert Reviews:
- MoabJeeper.com
- RockCrawler.com
- 4x4Wire.com
- Offroad.com



Individually handmade to order
by skilled craftsman in Houston, TX, U S A


                                

Details
Manufacturer ShrockWorks
Part #: JCJ?1-ROKS-01A
Fits: Jeep CJ-7 & CJ-8 (Scrambler) 1976-1986
$419.00
Options
Vehicle
Select Finish
Side Tube

Quantity


        

Reviews
Customer Reviews

Author: Ray Watson
Added to my 2002 jeep tj. Best sliders out there, period. Installed about year ago and has saved my rig countless times. I get compliments eveyday. I have recommended to everyone I wheel with.

Jeep CJ-7 & Scrambler Sliders
Jeep CJ-7 & Scrambler Sliders
Jeep CJ-7 & Scrambler Sliders
Jeep CJ-7 & Scrambler Sliders
Jeep CJ-7 & Scrambler Sliders
Jeep CJ-7 & Scrambler Sliders
Jeep CJ-7 & Scrambler Sliders
Jeep CJ-7 & Scrambler Sliders